Find a file, check the common Q&As, or reach our team.
Pick a category to open its files.
Water pressure dropped while the valve was closed for the scheduled Leak Test. The app reports it as Leak Test: Minor Pressure Drop (2 to 9.9 psi) or Leak Test: Major Pressure Drop (10 psi or greater).
Either one can mean water was in use during the test or a potential plumbing leak. Run a manual Leak Test from the PRO app to check again. If the alert keeps coming back, inspect the home's plumbing and fixtures.
Leak Test: Unable to Start means water was flowing at the scheduled time (0.03 gpm or more). The unit tries 3 times, then waits for the next scheduled Leak Test.
Leak Test: Skipped means the valve was closed at the scheduled time. The next Leak Test runs as scheduled once the valve is open and no water is running.
Neither one means a leak. If Unable to Start keeps happening, look for equipment that runs overnight, such as a softener regeneration, ice maker or pool filler. Add it as Connected Equipment, or move the Leak Test time.
Make sure the valve is open and no water is running. In the PRO app, open the customer's device and start a Leak Test from the device details screen.
The valve closes for the 2 minute test, and the result shows in Leak Test History.
Setup pairs the unit with the PRO app over Bluetooth first, then sends the home's Wi-Fi password to the unit, encrypted. If it won't connect, confirm the network name and password with the homeowner, keep your phone close to the unit with Bluetooth on, and make sure the home's Wi-Fi reaches the install location.
Still stuck? Call support at (480) 825-7463 while you're on the job.
From the PRO app home screen tap Add New Customer, enter the customer details, then add the location, its plumbing details and the device. The PRO App User Guide walks through each screen.
LeakSecure emails the Certificate of Installation to the homeowner's email address on file once the account is set up and the unit is installed. The certificate uses the name on the account, so set the account up in the homeowner's name.
For a copy or a name change, they can email support@leaksecure.com or call (480) 825-7463.
Order LeakSecure as part number LS-V1 through your wholesaler. Units are filled on PO and ship within one business day.
For pricing and availability, contact your Key Account Manager (KAM).
Yes, inside an approved LeakSecure outdoor enclosure. Order the enclosure through your wholesaler or your KAM, and install the unit in it following the User Guide.
The home's pressure reached the High Water Pressure limit set for that device. Most homes do best at 50 to 60 psi, and plumbing codes call for a pressure reducing valve (PRV) above 80 psi.
Check the device's water pressure readings in the PRO Dashboard, then talk with the homeowner about a PRV before the extra pressure leads to a leak.
Use the RGA return form under Support in Files for the job, or email support@leaksecure.com. Have the part number printed on the unit, the MAC address and the original receipt ready.
Ask your Key Account Manager (KAM) to schedule PRO app and PRO Dashboard training for your techs, or email support@leaksecure.com. The PRO App User Guide and both PRO Dashboard guides are under App in Files for the job.
Installed a LeakSecure unit? Claim your installer rebate with the install details and a couple of photos.